We have listed all of the machinery the company possesses, with which it can guarantee specific or special machining for its clients with high standards of quality.
Lathe Muratec MT20
Portal loading system with integrated with power supply to the pallet. Performs turning, milling, supported by an integrated gantry loader that allows you to work even at night unattended.
Smart Turn 1200 S Biglia n. 6 machinery
Smart Turn 1200 S Biglia n. 6 machinery
Lathe BIGLIA B658 YS
Main Spindle speed 2500
Maximum external diameter 350 mm
Maximum length 500 mm
Maximum rotating diameter 520 mm
Motor power 26 KW
Bar gap 80
Tailstock speed 4000
Bar gap 52
Spindle power 10 KW
This lathe is technologically very advanced and does not only turn the piece, but also mills it. In fact, it is equipped with radial and axial motorised tools, y-axis, main spindle with C-axis and tailstock with C-axis.
Using this machine we can perform the first turning and milling phase on the main spindle, then the item is transferred in the cycle to the tailstock (second spindle) in order to be turned and milled on the other side. The y-axis also enables us to mill above or below the centre of the piece as well. Basically, we have a lathe that can perform the tasks of a full machining centre.
The benefits are clear both for the customer and for us. Whereas before we had to turn the piece and then mill it in a subsequent phase, having to wait for the machining centre to become available, now we produce the part in a single solution with greater accuracy, speed and flexibility, managing to satisfy our customers’ requirements better.
This machine has also been provided with some very important and useful accessories such as the SBS tool stress control which allows us to work unsupervised (operator-free) and the LNS IDROBAR SPRINT S2 bar loader which enables us to work with bars of diameters up to 70mm (bar gap of the lathe).
Lathe BIGLIA B510 YS
Main Spindle speed 4000
Maximum external diameter 350 mm
Maximum length 500 mm
Maximum rotating diameter 520 mm
Motor power 26 KW
Bar gap 71
Tailstock speed 4000
Bar gap 45
Spindle power 7,5 KW
Maximum diameter LNS IDROBAR bar loader 80 mm
This lathe is technologically very advanced and does not only turn the piece, but also mills it. In fact, it is equipped with radial and axial motorised tools, y-axis, main spindle with C-axis and tailstock with C-axis.
Using this machine we can perform the first turning and milling phase on the main spindle, then the item is transferred in the cycle to the tailstock (second spindle) in order to be turned and milled on the other side. The y-axis also enables us to mill above or below the centre of the piece as well. Basically, we have a lathe that can perform the tasks of a full machining centre.
The benefits are clear both for the customer and for us. Whereas before we had to turn the piece and then mill it in a subsequent phase, having to wait for the machining centre to become available, now we produce the part in a single solution with greater accuracy, speed and flexibility, managing to satisfy our customers’ requirements better.
This machine has also been provided with some very important and useful accessories such as the SBS tool stress control which allows us to work unsupervised (operator-free) and the LNS IDROBAR SPRINT S2 bar loader which enables us to work with bars of diameters up to 70mm (bar gap of the lathe).
Lathe BIGLIA B501 YS
Main Spindle speed 4000
Maximum external diameter 350 mm
Maximum length 500 mm
Maximum rotating diameter 520 mm
Motor power 26 KW
Bar gap 71
Tailstock speed 4000
Bar gap 45
Spindle power 7,5 KW
Maximum diameter LNS IDROBAR bar loader 80 mm
This lathe is technologically very advanced and does not only turn the piece, but also mills it. In fact, it is equipped with radial and axial motorised tools, y-axis, main spindle with C-axis and tailstock with C-axis.
Using this machine we can perform the first turning and milling phase on the main spindle, then the item is transferred in the cycle to the tailstock (second spindle) in order to be turned and milled on the other side. The y-axis also enables us to mill above or below the centre of the piece as well. Basically, we have a lathe that can perform the tasks of a full machining centre.
The benefits are clear both for the customer and for us. Whereas before we had to turn the piece and then mill it in a subsequent phase, having to wait for the machining centre to become available, now we produce the part in a single solution with greater accuracy, speed and flexibility, managing to satisfy our customers’ requirements better.
This machine has also been provided with some very important and useful accessories such as the SBS tool stress control which allows us to work unsupervised (operator-free) and the LNS IDROBAR SPRINT S2 bar loader which enables us to work with bars of diameters up to 70mm (bar gap of the lathe).
Robotized work island including lathe MORI SEIKI SL-20 and robot KAWASAKI EX 4.0
ROBOT KAWASAKI EX 4.0
This robot can handle a weight of 40kg. Provided with double collet for shafts and flanges and supported by a 30-pallet feeder and a loader for shafts with a workpiece tipping station.
LATHE MORI SEIKI SL-20
Spindle Power 18 HP
Maximum external diameter 300 mm
Maximum length at tailstock 500 mm
Bar gap 52 mm
High-speed X and Z mm 12000/1
Lathe BIGLIA 131 S1 CNC
Spindle Power 18 HP
Maximum external diameter 350 mm
Maximum length at tailstock 450 mm
Bar gap 52 mm
High-speed X and Z mm 12000/1
Equipped with LNS hydrostatic bar pusher with automatic bar loading
Lathe BIGLIA 131 S1 CNC
Spindle Power 18 HP
Maximum external diameter 350 mm
Maximum length at tailstock 450 mm
Bar gap 52 mm
High-speed X and Z mm 20000/1
Equipped with LNS bar pusher
Lathe PONTIGGIA GALAXY NS CNC
Spindle Power 18 HP
Maximum external diameter 220 mm
Maximum internal diameter 480 mm
Maximum length at tailstock 500 mm
High-speed X and Z mm 12000/1
